An-San Key Panther SX Milling Machine

  • Vice system that can turn at +45 / -45 degree angle
  • Electromechanical fine tuning system
  • Motion-sensitive work
  • Standby standby mode

The TR-2050 Panther SX has all the features required for laser and dimple-key copying, as well as a lot of extra equipment. Experience the privilege of having these features developed by Ansan R & D team ...

The key to a key machine is the vans that hold the key. Equipped with veneer coded MN-02055, the Panther SX model offers superior performance to the user in copying graded dimple keys apart from straight dimple and pantograph vehicle keys. Along with the different connection points on the vice, as well as the various surfaces in these sections, you are able to connect many key groups without needing to attach them.

Fit the movement, because Panther is aware of what you do ...

The Motion Sensitive Run feature offers both safe and economical operation with the engine running only during key cutting. This feature also automatically turns the machine on when you start working. Even if you do not turn on the setting system when you start the setting process, Panther understands this and starts the system automatically. Some users turn off the key without turning off the cutter to process the other face after the operation of the key is over, thus causing undesired accidents. These accidents are avoided with the motion-sensitive operation feature designed for extra safety. Because the machine is not working except for use, it is also provided with energy saving.

All handles such as key handles, cutting process arm and body lowering arm, which are used on the machine, are specially designed ergonomically, which makes it easier to use when copying the design key, as well as to ensure that the key attached to the jug is tightened with the correct shape and strength.

Electronic Control Unit is an electronic hardware developed by Ansan R & D team for products. With the intelligent processor on the machine's electronic circuit board, the machine's operation, lighting, motion and many other systems are controlled by this processor. If you are aware of that background is always ready for everything you need.

Low wattage consumption, high and efficient power ...

With the new engine technology developed, maximum power is obtained with the lowest consumption, and you can safely use it for long years with this new generation motor which is silent and maintenance free.

Ansan R & D team thinking about nature at the time of product development did not use your machine at a time and made it wait for the lowest consumption. After you have finished working with Panther, you will be alerted in a minute or so by sound and video, and if you do not continue, the machine will go to sleep mode after this time.

It is environmentally friendly and comfortable lighting with specially designed LED lighting focused on the right area, and you do not have to open the lighting yourself because Panther automatically opens when you realize you need it.

You can take advantage of the Fix Feature fixed to all axes to continuously repeat constant axis movements during key copying and remove it from the power envelope. With this feature, you can also gradually reduce the fatigue of the cutter and reduce the life of the cutting tool. For this you only need to translate the hand buttons in the X-Y-Z axes.

All axes are equipped with high quality linear bearings. There are a total of twelve linear bearings on each machine, four each axis. The system also has a design that does not require lubrication and maintenance, as well as ease of use and precise working capability. At this point, Panther will continue to serve you stable for many years without service.

Due to the short operating life of the mechanical buttons and short maintenance periods, alternative control systems are needed today and the most used system is designed to provide you with reliable control over your machine for years and ergonomic position on the machine.

Since the tools used in the copying process of the dimple and laser type keys are different from each other, the tools are changed and processed. Since these tools are different from each other in the gauges, it is necessary to perform a calibration to introduce these gauges to the machine after changing the gauges. With the Electronic Sensitive Setting system developed for this calibration, you will be able to make adjustments to your machine quickly and with high precision, for a few seconds ...

The products we manufacture have passed all safety tests in compliance with international standards and are manufactured according to these standards. Our company is the only firm that has the certificate of service competency issued by the Turkish Standards Institute. The electrical and electronic equipment on the products are produced from recyclable materials with all the parts used together with all necessary certifications.

So you can use it safely ...

Height: 34cm
Width: 30cm
Depth: 42cm
Weight: 20kg

Cutter Guard
Power Cable
Instruction Manual
Buffer Adapters
Spare Fuses
Allen Key for changing Cutters
Dimple Cutter & Tracer
Drill cutter 3mm & Tracer
Drill cutter 2mm & Tracer


Write a review

Note: HTML is not translated!
    Bad           Good

For immobiliser and reomte control programming :

VVDI Tools , Keymaster DP, AVDI, Zed Full,AD100Pro, MVP Pro, SBB ,

Shipping Time:

1-3 business days for order processing after received the payment.
The shipping time is about 2 to 5 days via TNT and DHL, 15-30days via POST AIR to Worldwide
Note: We hope it arrive on time but since this is an international delivery, shipping time will be highly depended on the courier company and local customs/duties. Thank you for your understanding.

An-San Key Panther SX Milling Machine

  • : 1808
  • Product Code: AN-TR-2050SX
  • Availability: In Stock
  • $1,340.00
  • $1,200.00
  • Ex Tax: $1,200.00

For any questions please do not hesitate to contact us

    +90 533 375 70 70