An-San XCUT High Resolition key profile cutting machine

This is the CDM-109 X-Cut with history, you would like to have a mini raw key factory in your workplace? 
If the raw key you want to copy is not produced or is not in your inventory at the moment, you can generate a new raw key by reading the original key with X-Cut, and in a few minutes ...

 

You won't believe the speed ...

The X-Cut, which has an unusual structure, has four separate axis movements and the reading and cutting axes move independently of each other. The axes connected to the unit are only operated at their respective duty times and thus the axis working life is doubled. 

Thanks to the nano technology, X-Cut is able to successfully copy the keys with the finest channel width thanks to the reading tips. The power behind this success is due to the design on the reading end that the Ansan arge team has been working on for many years. 

 

 

 

 

With three different points on the X-Cut reading clamp, all desired keys can be easily connected to the clamp. After the switch is connected to the vice, the model of the connected switch and the type of copy operation are selected. The reading process takes approximately one minute with high-resolution scanning with Nano-technology reading tips.

 

 

 

The machine specifies the raw switch suitable for the scanned key and takes position automatically for you to connect. Two different types of raw keys are available in four different thicknesses. The appropriate size of the switch is X-Cut. The fully automated X-Cut will physically check the accuracy and dimensions of the automatically connected switch. 

 

 

 

The cutting process is between 5 and 10 minutes depending on the profile structure of the switch and the preferred copy option.  The chips that come out during the cutting process are poured into the sawdust which is below the clamp.   The switch is ready for use after the cut-off of the end of the key has been cut off.

 

 


Happy customers with the X-Cut offering a professional solution to your raw key needs in a few steps and short time ....

 

To increase the ease of use and processing speed with the LCD screen integrated with X-Cut and touch capacitive buttons can work without problems for many years. The ır Step by Step ort interface system is user-friendly and eliminates usage errors.

 


 

She is very meticulous about it because it is not about ... 

The X-Cut stores the chips that come out during the cutting process into the removable chip bowl placed under the cutter section. Thanks to this chip container that you can easily remove from the place and clean it, your machine is kept clean and always clean. All you have to do is just empty this container at the end of the process, it is quite practical ...

 

Electronic Control Unit is an electronic equipment developed by Ansan R & D team for products. The microprocessor on the machine provides both operation and control of all components and also records all operations on the machine. In this way, maximum safety against all kinds of failure is provided, as well as the maintenance of the cutter tool, maintenance times, such as the need for various visual and audible states. 
 

 

 

 

  

Low watt consumption, high and efficient power ...

The X-Cut has a powerful and stable DC motor to create the most precise switch profiles. For this reason, maximum power is obtained with the lowest consumption, and your machine is silent and does not need maintenance.

Ansan R & D team, who is thinking about nature in product development, has made your machine ready for the lowest consumption when you are not using it. Even if it is plugged in, your machine is ready with A + energy consumption.

The cutting section is illuminated by the environmentally friendly LED technology.

 

 

 

 

 

Write a review

Note: HTML is not translated!
    Bad           Good

For immobiliser and reomte control programming :

VVDI Tools , Keymaster DP, AVDI, Zed Full,AD100Pro, MVP Pro, SBB ,

Shipping Time:

1-3 business days for order processing after received the payment.
The shipping time is about 2 to 5 days via TNT and DHL, 15-30days via POST AIR to Worldwide
Note: We hope it arrive on time but since this is an international delivery, shipping time will be highly depended on the courier company and local customs/duties. Thank you for your understanding.

An-San XCUT High Resolition key profile cutting machine

  • : 503
  • Product Code: AN-CDM-109
  • Availability: In Stock
  • $7,950.00
  • Ex Tax: $7,950.00

For any questions please do not hesitate to contact us

    +90 533 375 70 70

   info@autokeystore.com

   Autokeystore

Tags: An-San XCUT High Resolition key profile cutting machine