VVDI-PROG EWS4 Adapter
Xhorse VVDI Prog EWS4 Adapter for easily reading & write BMW EWS 4 modules data. No soldering is needed just put EWS4 Module into the adaptor, tighten it, and then connect it to VVDI PROG.
Add EWS4.X(ADAPTER) option in <4-IMMOBILIZER>-> (Need EWS4 ADAPTER)
How to use VVDI Prog EWS4 Adapter
- Put the EWS4 module in the adapter and lock it
- Connect VVDI PROG with EWS4 adapter, then connect vvdi prog with the computer
- Open VVDI Prog software
- Select Type Immobilizer, Brand BMW, chip EWS4 adapter
- Check connection diagram
- Click Read ID to identify the MCU and make sure that the connection is correct to avoid possible failures
- Chip initialization, make sure all chip type matches
- It has to match any of them, if not, it is connected badly
- Click Read to read EEPROM data and save it
