Xhorse Toyota 8A Non-Smart Key Adapter for All Key Lost via OBD No Remove Immo Box

• For Toyota 8A H chip (non-smart) All keys lost from year 2014 to 2019 via OBD, without disassembling Immobilizer box
• Supports VVDI2, Key Tool Max+ Mini OBD Tool
• Everyday has 5 times limit. If more than 5 times attempt, it will display "Run out of attempts for the day"
• This is for standard 8A turn keys, no smart key

Xhorse Toyota 8A control box cable supported car models:

Levin, Corolla, Rav4, Prado, Land Cruiser, Camry, Highlander, Reiz, Sienna

You can register with phone number, and get online service.

Toyota 8A Adapter with VVDI2 Connection:

FAQ:

Q: Even without vvdi2 i can use it with mini obd tool?

A: Yes. With Key Tool Max+ Mini OBD.

Q: Does it require token or authorization?

A: No, it does not require token nor license.

Q: What years would this work on?

A: It works on all years.

Q: Toyota Aygo 2015 System H all keys lost. Does this computer program the chip?

A: Yes, it does.

Q: Hilux? Hiace?

A: No problem, Toyota Hiace and Hilux (2015-2019 Immo box)

Q: Proximity or just keyed?

A: Not smart key. Just key.

Q: What versions of modules Immo H supports?

A: Immo box F3-F4-K6-S6

Q: I thought it was for obd but nope

A: If it's for Obd2, yesterday I did it in bench but it's by Obd2 via antenna without removing any screws from the board.

Q: Hiace and Hilux which years please?

A: 2016-2017-2017-2018-2019

Q: Is this used to program toyota H immo box on bench?

A: not on bench on car via obd no need to dismantle the dash anymore vvdi2 new software + key tool max u can read Immo data and make keys directly to Immo or other option is barracuda and tango on bench.

with this set must be on car because there is a connection to fuse box and obd and ign coil.

Q: What tool use to this connector to programing

A: VVDI2 or Key Tool Max+ Mini OBD Tool.

Q: Possible to program smart key Land cruiser after 2016?

A: Yes, it will.

Q: Possible to use the 8a adapter with vvdi2 basic version? or full version only?

A: You can use the 8A adapter with any versions of vvdi2.