Xhorse VVDI Mini Prog Programmer Wifi Version Support IOS & Android

Product Code : DXH1782
399.00 EUR
Featured Campaigns Related the Product



  • Features
  • Payment Options
  • Comments (0)
  • Recommend
  • Images
  • Product Description

    Xhorse VVDI MINI Prog Programmer, worked on Xhorse APP, wifi version.
    No need to remove chip/solder/cut the wire/lift the pin
    No need to dismantle or cut the wire with no risk of damaging PCB
    Easy to use for green hands

    Xhorse Mini Prog WiFi Bluetooth EEPROM and Chip Programmer with Built-in Battery

    The Xhorse VVDI MINI PROG Solder-Free Programmer is a self-contained programming and re-flashing device that can read and write EEPROM data without soldering, VVDI Prog mini can be used for "Re-Flash" type Key Programming, memory device cloning, and module programming.

    VVDI Mini programmer does not require a PC to use it, like other EEPROM programmers on the market and it's compatible with any iOS or Android-based smartphone or tablet through Wifi or Bluetooth.

    Mini Prog Burst Points:

    • Download Xhorse App and connect to your Mini Prog via Bluetooth or WiFi. Mini Prog allows you to finish works like data reading, writing and editing directly on your smartphone, providing greater convenience when working outside.
    • Mini Prog supports PIN status detection and will give notice when poor contact arises, which makes it easy to operate and avoid data loss and damage.
    • Portable and Easy to use:
      Professional intelligent programming device, providing a portable chip programming solution A handheld and standalone device for reading and writing data.
      The three different heads can be easily switched to read and write different chips, to meet different requirements
    • Store data without relying on a computer:
      For most 8-pin integrated circuits, you can use a compression contact to read and write data.
    • No Need to Remove Chip
      No need to remove the chip/solder / cut the wire / lift the pin
      Many models will also be equipped with the corresponding adapter, such as the BMW CAS adapter
    • No Need Soldering
      Porsche BCM solderless adapter, Land Rover adapter, etc...
      (These adapter boards are also expected to work with VVDI PROG and VVDI Key Tool Plus).


    Xhorse Mini Prog Benifits:

    • This new MINI PROG is the result of intelligence and speed to provide users easier programming solutions.
    • Does not require a PC to use it. You don't need to carry a computer or other devices anymore when you are working. What you need is only a mobile phone!
    • You can do the programming work anywhere, your house, car garage, workshop, office, outdoor, coffee shop, car etc. Just take it anywhere, and make it any time!
    • 3 Detect Connectors (Test Heads) Suitable for various Transponders.
    • Connect MINI PROG to the Xhorse App via Bluetooth & Wifi.
    • Works with series of solderless adapters to read chips easily
    • Small Prog Language:
      English, French, Spanish, Portuguese, Chinese
      The language of the rest Besides these five, only the local xhorse dealer can activate the relevant language
      For example: If you need the Russian language, it can only be activated for customer xhorse Russia dealer.

    Mini Prog feature:
    • Portable; Easy to use
    • No need to remove chip
    • No need soldering
    • No need to cut the wire
    • No need to lift the pin
    • Connect to the APP via WiFi or Bluetooth
    • Working Speed: The smart screen on top of the MINI PROG clearly shows the real-time working status.
    • Built-in battery: and wireless data transmission, no need for external power supply and U disk for data transmission.

    What's the function of the new MINI Prog?
    • Solder-free Programming
    • EEPROM Reading & Writing
    • Dashboard Data Reading & Writing
    • Data Editing
    • Press Header
    • PIN Status Detection
    • APP Control
    • Cloud Backup

    Multi-module Reading & Writing

    IMMO data reading & writing


    EEPROM reading & writing

    Support reading and writing 24C××, 93C××,95×××, 25××× etc. EEPROM data
    Covering 95% of common EEPROM in market

    ECU data reading & writing

    Support reading & writing DFLASH and PFLASH of BMW, AUDI, VW
    Dashboard data reading & writing

    Support Honda, Kia, Hyundai etc.

    The support list above is displayed only partially and you can refer to the latest version of MINI PROG for the complete list.

    Pin Header Reading Chip Directly, Pioneer in Industry

    Advantages of VVDI Prog MINI
    XHORSE MINI PROG Other Programming Devices
    Connect to the smartphone via Bluetooth and WiFi. To enhance the working efficiency and reduce communication failures. Connect to the computer via USB cable. You might easily get a vehicle breakdown due to the bad contact caused by the USB cable port.
    Support reading chip data without soldering. Solder to PCB, which may lead to car breakdown or data loss if you are not good at soldering.
    No need to dismantle the device or cut the wire. A user-friendly device for both green hands and experts. Improper dismantling or cutting may increase the risk of car breakdown.
    Support pin detection and report when it detects any problems. Largely avoid data loss. Unable to check the status of pins and data loss may be easily caused due to solder skips.
    Read & write most 8-pin ic chip data via its 3 pin headers directly without adapters. Adapter needed and you need to spend a lot on buying all types of adapters.
    Support multi-module reading & writing, such as EEPROM, ECU, etc. With this device, you can solve most of problems you encounter at work. Support reading & writing a few modules only. You need to buy many devices to satisfy the needs of work.
    Support data local & cloud storage, avoiding data loss due to misoperation. Data loss may arise due to a lack of cloud storage.
    Built-in battery ensures working without USB cables, saving a lot of trouble when you work outside. Inconvenient to work outside with USB cable.
    Provide professional technical backup. Problems can be resolved on Xhorse App directly by Xhorse technicians. You can only seek help from the product dealer.
    Working Interfaces
    xhrose MINI PROG module reading

    You don't need to carry a computer or other devices anymore when working. What you need is only a mobile phone! Download Xhorse application in APP store and find MINI PROG, then start working! We support both IOS and Andriod systems.

    The working interfaces are as above. As a common advantage of all Xhorse products, you will be instructed for every step. Each step such as reading or writing can be finished on your phone. What's more, you can directly resort to Xhorse technicians on Xhorse APP if you encounter any problems. We'd be very happy to help!


    Ultra-simple operation that adapts to you.

    There is no need to remove the chip when reading. All you need is to press the pin header at the appropriate chip and then you can read and write data on Xhorse APP.
    xhorse mini prog appearance

    Smart Detection

    Detect Pin Connection Status with Great Accuracy

    Your work, more secure.

    MINI Pen Prog supports pin status detection and will give notice when poor contact arises, which makes it easy to operate and avoid data loss and damage.
    xhorse mini prog smart detection
    High-tech made simple

    APP Control With No Need to Use Computer Anymore

    Download Xhorse APP and connect to your MINI PROG via Bluetooth or WiFi. MINI PROG allows you to finish works like data reading, writing and editing directly on your smartphone, providing greater convenience when working outside.
    xhorse mini prog app control

    Cloud Storage, Safer Than Ever

    Data can be stored in Local File as well as Cloud to ensure the safety of data, avoiding data loss caused by misconduct.

    Artfully Crafted

    Sleek Design, Best-in-class Experience

    Incredibly Light

    Extremely Portable

    Extraordinarily Convenient

    MINI PROG weighs no more than 0.21kg and it's easy to operate and carry. It offers the perfect blend of form and function, fitting into any work environments.

    xhorse mini prog sleek design


    Smart App control
    WiFi Bluetooth
    Capacity: 2550mAh
    Normal working hour: >5H
    Standby Time: >5D
    Recharging current: 1500mAh

    Standard Configuration:
     MINI PROG package

    DB15 Cable * 1 pc

    EEPROM Adapter * 1pc

    Pin Headers *3 pcs

    Pin Header 1 supports reading DIP8 chip

    Pin Header 2 supports reading SOP8 wide-type package chip

    Pin Header 3 supports reading SOP8 standard package chip
    xhorse mini prog 3 pins

    Optional Solder Adapters for VOLVO (KVM), BMW (CAS3, CAS4), PORSCHE (BCM), LANDROVER (KVM)
     MINI PROG optional adapters

    BMW Adapters

    BMW CAS3/CAS3+, CAS4/CAS4+, FRM, DB15-DB25 adapter(for EWS4 adapter only), D80/35080, ECU interface board kit

    PORSCHE IMMO Adapter

    Porsche BCM



    VOLVO IMMO Adapters


    MB91F Dashboard Adapter

    Honda FIT-H
    Honda FIT-L
    Hyundai SONATA
    KIA K3
    KIA K5
    ECU Adapter
    Remote Renew Adapter
    9S12XE cable
    MCU cable
    DB9 cable
    12V+5V power adapter
    Pin Header 4

    Xhorse XDNP30 ECU Adapter BMW ECU ISN Reading without soldering.

    All adapters and cables above are optional and are not included in standard configuration.

    Weight (Kg)
WhatsApp x Contact with WhatsApp Click!
Prepared by  T-Soft E-Commerce.