EN − EUR
Autohex II BMW Professional Programming
Out Of Stock
Notify me when its in stock- Only with Autohex: Read ISN in G Series:
MD1 and MG1 (MDG1) ISN Reading of following DME/DDE (writing is possible for some DMEs):
- DME_840
- DME_840H
- DME_84T0
- DME_860
- DME_86T0
- DME_880
- DME_88T0
- DDE803P
- DDE832C
- Only with Autohex: Read and Write ISN in MD1 and MG1 F Series:
MD1 and MG1 (MDG1) ISN Reading of following DME/DDE:
- DME_83T1
- DME_840
- DME_841
- DME_841H
- DME_861
- DME_88T0
- DDE803
- Read and Write All ISN in F Series:
Autohex II reads and writes all ISN of DME/DDE in F series:
- EDC17C41
- EDC17C41
- EDC17C50
- EDC17C56
- EDC17C76
- EDC17CP09
- EDC17CP45
- EDC17CP49
- MEVD17.2
- MEVD17.2.3
- MEVD17.2.4
- MEVD17.2.5
- MEVD17.2.6
- MEVD17.2.8
- MEVD17.2.9
- MEVD17.2.G
- MEVD17.2.H
- MEVD17.2.P
- Read and Write All Long ISN in E Series:
Autohex II reads all ISN of DME/DDE in E series:
- EDC17C06
- EDC17C41
- EDC17C50
- EDC17C56
- EDC17C76
- EDC17CP02
- EDC17CP09
- EDC17CP45
- EDC17CP49
- MSV80
- MSV80.1
- MSD80
- MSD81
- MSD85
- MSD85Y
- MSS60
- MED17.2
- MEV17.2
- MEV17.2.2
- MEVD17.2
- MEVD17.2.2
- MEVD17.2.7
- MEV1746
- MEVD17.2.4
- MEVD17.2.5
- MEVD17.2.9
- Read most of old ISN in E Series:
Autohex II reads the ISN of DME/DDE in E series:
- EDC16C1
- EDC16C31
- EDC16C35
- EDC16CP35
- ME9
- ME9.2
- ME9.2.2
- MEV9.2
- MSV70
- MS45
- Indivedual Programming for any Ecu (DOIP Protocol)
Autohex II is the most advanced tool for BMW Ecu programming, it supports E series, F Series and G Series
- CAS1, CAS2, CAS3, CAS3+, CAS4 and CAS4+ ISN
With Autohex II you can read and write ISN from all CAS versions in E and F series
- Read ISN from all Trciore DME/DDE by boot mode
This function is important when the DME/DDE is not responding, and you need the ISN for replacment
- BMW E series EGS ISN matching with CAS
You can reset EWS security from all BMW E series EGS by OBD
- BMW F series EGS EWS Reset for 6HP and 8HP models
You can reset EWS in EGS 6HP (On Bench) and 8HP by OBD or On Bench
- BMW E series, F series, and G series Auto Coding
Autohex II calculates the required coding data automatically from the car vehicle order, then it applies these data to the target module
- Manual Coding in E Series and F Series
You can modify the Ecu coding to add and remove features in any Ecu in BMW cars
- Managing the Vehicle Order (FA) in BMW cars
You can modify the Vehicle Order to do retrofit the configuraion. You can also backup and restore the FA from the backup Ecu
- Unlock Security from CAS4, CAS4+, FEM and BDC
You can unlock secrity of CAS4/4+, BDC and FEM to able to:
- Change CAS and BDC and FEM VIN
- Change CAS and BDC and FEM ISN
- Mileage Reset for CAS and BDC and FEM
- Making a key for CAS and BDC and FEM (not supported in this package)
- Read and Write ISN on Bench for MSX8X
With Autohex II you can read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the Ecu.
What you miss in this package:
- BMW E and F Key programming And Hextag Tool (can be ordered later)
What you get:
- Autohex II Hardware WVCI HW 5.
- BMW Software Standard License.
- BMW Ecu Online Programming License.
- BMW Software ISN Boot Mode License.
- BMW ISTA/D driver to run dealer software.
- 1 year technical support.
- 1 year hardware warranty.
