HexProg Chip Tuning And ECU Programming Tool

Before you order Hexprog, please consider to check new options:

• Hexprog II Full Set
• Hexprog II Basic Set

Hexprog II is to provide full support for Ecu repair, Ecu cloning and Chip tuning, while Hexprog has the ability to offer a partial support for Ecu cloning/Chip Tuning and more functions like EEPROM read/write, Key reset.

• Master version. One License for all protocols On bench and OBD
• Supports one of the largest Ecu/Tcu list in Cars and Trucks for Ecu cloning and Chip Tuning, check Hexprog Ecu List
• Supports both old and latest Ecus/Tcus from Bosch, Continental, Delphi, Marelli, Denso, Temic, TRW and Valeo...etc.
• Reads all BMW long ISN from BMW DME and DDE including MD1 and MG1 in F/G series
• Supports online services like IMMO OFF, DPF OFF, EGR OFF, AdBlue,,,,etc.

With Hexprog you can read and write P-Flash, D-Flash, External Flash, and external EEPROM with the option of automatically checksum correction, you will have many methods in most of Ecus:

• Factory mode (On Bench) for most of Ecus/Tcus
• Tricore Boot Mode for all Tricore Ecus
• BDM (Background debug mode)
• JTAG for Renesas and Freescale

Hexprog supports read/write map areas, (virtual read is supported too). It includes important functions in some Ecus, like VIN Changing, Coding backup/restore and Fault codes read/erase

With Hexprog you can read all long ISN from any BMW Ecu including the latest Bosch MG1/MD1 Ecus starting from 2005 up to today DME/DDE.

With Hexprog you are able to break the protection of immobilizers like CAS in BMW, EIZ/EIS in Mercedes Benz, BCM in Volkswagen and Porsche…etc.

With Hexprog you can edit many Flash data like:

• Edit CAS3+ VIN, ISN and keys
• Edit CAS4, CAS4+ VIN, and ISN
• Edit mileage for BMW instrument clusters

• You can repair the BMW FRM 3 in one click, as well as other FRM types
• You can reset mileage in protected EEPROMs like M35080, M35160, 080D0WQ, 160D0WQ
• You can do key reset for many brands like Audi, BMW, MINI, Porsche, Toyota, Fiat, Renault...etc.
• Read/Write a wid range of SOP8 EEPROMs.

• Hexprog Main Unit: A powerful multifunctional tool equipped with one of the fastest microcontrollers in this business sector.
• Fully functioning Ecu Cloning/Chip Tuning License for 30 days more details in F.A.Q.
• Power Module: Used for Ecu Cloning/Tuning function for On Bench and Boot Mode of different Ecus/Tcus.
• OBD Cable: Used for Ecu Chip Tuning/Ecu Repair by OBD to read/write Ecu MAP area.
• BDM Cable: A High-quality cable made of wires used in aerospace.
• MPC5XX Module: Used for Ecu Cloning/Tuning of EDC16XX, MEXX and other Ecus with MPC5XX.
• JTAG Module: Used for Ecu Cloning/Tuning of Equipped with SH725XX, MPC56XXX.
• EEPROM/Key Reset Module: Used to connect Keys to reset Also used with EEPROM to read/write/reset.
• Key reader/writer module: Used to read/write BMW keys (with Autohex II).
• Power Adapter: Special power supply for Hexprog 14V-3A.