Autohex II BMW Standard with HW4

Autohex II HW4 and Full functions of ISN read and write in CAS, EGS, DME and DDE by OBD, BMW ISTA-D Driver, FA Manager, and Diagnose services

SOFTWARE DOWNLOAD

Using this kit you can do following:

• Read old ISN in BMW E series for following Ecus:D62M57A0,  D62M57B0,  D60PSA0,  D50M57A0,  D50M57E1,  D60M47A0,  D60M57A0,  MEV9N46L,  ME9N45,  ME9N62,  ME9E65_6,  N73_L0,  N73_R0,  ME9N62_2,  MSV70,  MS450DS0,  N62_TUE,  N62_TUE2.
• Read Long ISN (SK) in BMW E series from following Ecus:  MSV80,  MSD80,  MSD81,  MSD85,  MSD85Y,  MSS60,  MEVD176K,  ME17N45,  MED17_2,  MED17_2N,  MEV17_2,  MEV17N46,  MEVD174K, MEVD174KW,  MV1722,  MVD1722,  MEVD172,  MEVD1724,  MEVD1725,  MEVD172Y,  MEVD17KW,  D70N47A0,  D70N47B0,  D71N47A0,  D71N47B0,  D71N47C0,  D71N47D0,  D72N47A0,  D72N47B0,  D73N47A0,  D73N57A0,  D73N57B0,  D73N57C0,  D73N57D0
• Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y,  MEVD172,  MEVD1724,  MEVD1725,  N63TU_L0,  N63TU_R0,  S63TU_L0,  S63TU_R0
• Read/Write long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
• MDG1 Read ISN in BMW F series from following Ecus: DME_83T1, DME_841, DME_841H, DME_861, DME_88T0, DDE803.
• MDG1 Read ISN in BMW G series from following Ecus: DME_840, DME_840H, DME_84T0, DME_860, DME_86T0, DME_88T0, DDE803P, DDE832C. 
• CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
• BMW E series EGS ISN matching with CAS
• BMW F series EGS 6HP and 8HP EWS Resetting
• BMW E and F series coding for all Ecus (calculation of Ecucoding is calculated from FA)
• Vehicle order modification and backup and restore from LM,FRM,...ETC
• Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
• Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
• Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
• Read/Write ISN of MSD80,  MSD81,  MSD85,  MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the Ecu.

What you miss in this Kit:

• BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)
• BMW E and F Key programming (can be ordered later)
• ISN Reading from Tricore Ecus by boot mode. (can be ordered later)

What you get:

• Autohex II Hardware WVCI HW 4
• BMW Software Standard License
• BMW ISTA/D driver to run dealer software
• 1 year technical support
• 1 year hardware warranty

Autohex II BMW Software

Autohex II Programming using ENET

Autohex II BMW Software is your best choice if you are looking for a total solution for all BMW matters you may face in BMw E/F or G series, it combines the Ecu programming, Ecu coding, Manual coding, vehicle order editor, BMW ISN Editor including the latest MDG1 Ecus, Key programming and more functions.

To know more about these special functions check Autohex II BMW Software

An example of such functions, below videos show the ease of using Autohex II.

More Info about BMW?